Four Floor-Saw Programs, Not One Universal Blade
We organise floor-saw supply by the job and machine: cured concrete, reinforced concrete, asphalt or asphalt-over-concrete, and early-entry green concrete. These programs can share a catalogue category, but they should not share one default blade specification.
Diameter, kerf, arbor/drive pattern, saw power, wet or dry mode and approved maximum RPM are fixed before the matrix and segment direction. For an explanation of the early-entry system, see how the up-cut blade and anti-ravelling skid plate work together.
Program Matrix
| Program | Buyer inputs | Engineering focus |
|---|---|---|
| Cured concrete | Saw, power, diameter, aggregate, cut depth | Self-sharpening, straight tracking, thermal load |
| Reinforced concrete | Concrete strength, rebar condition, wet/dry mode | Impact, segment retention, feed stability |
| Asphalt | Layer build-up, sand abrasion, saw and linear metres | Matrix wear and undercut protection |
| Early-entry green concrete | Saw/interface, cut window, aggregate, blade + plate scope | Up-cut fitment, kerf/plate match and edge quality |
Machine-First Fitment
Send the saw make and model first. If the buyer does not know the interface, send photographs of the flange and old blade. We then confirm diameter, pilot bore, drive feature, kerf and maximum RPM. This prevents a technically good blade from becoming an unusable SKU.
Substrate-Matched Sample Approval
Hard aggregate, abrasive sand, rebar and green concrete create different wear and cutting behaviour. We propose the matrix and segment direction in the background, then validate the result with a signed drawing and sample cut. Public colour codes or competitor labels do not replace that approval.
OEM RFQ
- Saw make/model and power.
- Diameter, kerf and interface drawing or old-blade photo.
- Substrate, aggregate and reinforcement condition.
- Wet, dry or early-entry mode and expected cut depth/length.
- Annual quantity, private-label marking and packaging.
Match a Floor-Saw Program
Use the selector to choose the machine and job condition, then carry the matched program into the RFQ.
Open Selector