Skip to main content

PGM Quality Framework for Masonry Drill Bit Manufacturing | Zhonghuan

How PGM Documents 010, 200, 304 and 101 control masonry-drill geometry, manufacturing, run-out records, surveillance and mark use — with Zhonghuan's production and QC workflow mapped for OEM review.

Request Quote

PGM Manufacturing Framework for Masonry Drill Programs

PGM connects the geometry of the finished masonry drill with the factory process that produces it. Cutter diameter, symmetry, circular run-out, joining control, batch release and protected-mark scope sit inside one procurement framework for anchor-related drilling.

The Four Documents and Their Roles

  • Document 010: cutter geometry, symmetry, circular run-out and multi-cutter verification.
  • Document 200: application, factory audit, initial approval, dimensional sampling and surveillance.
  • Checklist 304: factory controls from carbide intake and joining through straightening, measurement and final release.
  • Document 101: official mark use by manufacturing site, product type and approved range.

How Zhonghuan Maps the Workflow

Zhonghuan organizes OEM review around the complete production chain: incoming carbide batch, approved head drawing, joining-face preparation, controlled brazing or welding, post-join symmetry, straightening, measured circular run-out, final release and retained batch records.

Each project can align its required drawings, measurement format, sample size and release documents before production. Where the official PGM mark forms part of the buyer specification, the applicable manufacturing site, product range and authorization scope are confirmed during RFQ and packaging approval.

OEM Project Package

  • Product type, diameter and head-architecture matrix.
  • Incoming carbide and approved-drawing references.
  • Joining-process and post-join symmetry records.
  • Circular run-out results after straightening.
  • Sample drilling and buyer approval plan.
  • Final release, batch traceability and packaging-mark scope.

Build a PGM-Oriented SDS Project Package

Send the diameter range, head construction, anchor application, required records and packaging scope. Zhonghuan will map the project to the relevant PGM manufacturing and documentation points.

Request Project Review

Ready for a Production Quote?

Send quantity, target material, and timeline to get a faster engineering response.

Request Quote

Related Resources

Best Drill Bits for Reinforced Concrete: 2-Cutter, Full-Carbide Head or Rebar Cutter
How professional buyers choose drill bits for reinforced concrete: when a 2-cutter is enough, when a full-carbide head drills through rebar without a bit change, and when a rotation-only rebar cutter is the right tool. ZHPLUS / ZHMAX programs, technique and RFQ checklist.
What Are SDS Drill Bits? A Practical SDS-Plus and SDS-Max Buying Guide
Choose SDS-Plus or SDS-Max drill bits for contractor jobs, anchor holes and rebar conditions, then plan same-size packs, bulk supply and private-label OEM.
SDS-Plus vs SDS-Max: The Engineer's Decision Guide
SDS-Plus vs SDS-Max compared by impact energy (J), carbide grade requirements, cost per hole, and the 26 mm switchover myth. The technical guide that goes beyond shank diameter.
SDS Shank Types Explained: SDS-Plus, SDS-Max, Steel Materials and Stop Drill Bits
Identify SDS-Plus, SDS-Max and hex connections; understand shank and body steel, carbide tips, joining, chuck compatibility and fixed-depth stop drill bits.
SDS-Plus Drill Bit Head Types Explained: Solid, 1-Piece, and 3-Piece Carbide Cutters
The four cutting edges on your SDS-Plus drill bit may look identical from outside — but how those edges are made determines lifespan, accuracy, and failure mode. A complete technical breakdown.
SDS Plus Drill Bit Diameter vs Rotary Hammer Energy Class: The Matching Guide
Match SDS Plus drill bit diameters to the right rotary hammer energy class. Includes joule ratings, diameter recommendations, and market segmentation for European and US distributors.
SDS Drill Bit Carbide Grade Guide: YG8C vs YG11C, Solid Carbide Tips and OEM Specs
Choose the right tungsten carbide grade for SDS-Plus and SDS-Max drill bits. Compare YG8, YG8C and YG11C, cobalt content, coarse grain, HRA/TRS specs, 2-cutter, 4-cutter, solid-tip carbide heads and OEM quality checks.
Zhonghuan SDS-Plus Drill Bit Manufacturer: Premium OEM Alternatives & Product Guide (2026)
Build a premium private-label SDS range with Zhonghuan: self-centering 2-cutter, 5X four-cutter and full-carbide heads, plus SDS-Max extensions. Product images, factory videos and an application-led OEM selection guide.