Skip to main content

Makita B-15045 Rock Blaster: SDS-Max Mining Bit 32 × 920 mm

Author Zhonghuan Engineering Team
Published 2026-11-18
Reading Time 4 min read

Need Help Choosing a Tool?

Share your application, required dimensions and quantity. Our engineering team can recommend a product and confirm pricing and lead time.

Request Engineering Quote
Makita B-15045 SDS-Max mining drill bit, cross tip illustration and side view of the tungsten carbide head
Figure 1.0: Makita B-15045 Rock Blaster: SDS-Max Mining Bit 32 × 920 mm Overview

The Makita B-15045 is a tungsten carbide tipped (TCT) SDS-Max mining drill bit for hard rock. It is Ø32 mm, 800 mm working length and 920 mm overall. Makita calls it Rock Blaster in its Spanish-language catalogue and lists the same SKU under ZENTRO Mining in Slovenia.

B-15045 dimensions and the Rock Max comparison

In a distributor’s order, write out Ø32 × 800 × 920 mm and keep the part number alongside it. The two 920 mm bits below share dimensions but belong to distinct Makita series. Both 570 mm versions have a 450 mm working length.

Makita familyPart numberDiameter (mm)Working length (mm)Overall length (mm)
Rock BlasterB-1461332450570
Rock BlasterB-1504532800920
Rock MaxB-3945332450570
Rock MaxB-3946932800920

B-15045 vs B-39469: what changed in the primary blade?

B-15045 is the earlier Rock Blaster design. In Makita Malaysia’s 2025–2026 accessories catalogue, B-15045 appears under Mining and B-39469 under Mining 2. Both are listed at Ø32 × 800 × 920 mm. For a repeat order, keep the part number on the drawing and purchase order.

B-15045. The earlier B-15045 has a broad primary blade spanning the diameter. In the catalogue view its edge looks comparatively straight across the two wings, with short transverse edges completing the cross.

B-39469. The B-39469 close-up shows a more pronounced peak at the centre of the primary blade and shaped transitions into its two wings. Two smaller carbide inserts sit to either side of the blade, visibly behind the leading edge. Makita’s Mexico catalogue describes a reinforced main insert, supported side inserts and a wide flute entry for rock cuttings. Both bits are four-cutter designs.

B-15045 Rock Blaster full bit, cross-tip drawing and carbide head close-up
B-15045 Rock Blaster. The cross-tip drawing shows the primary blade spanning the diameter, with a relatively straight edge across the two wings.
Makita B-39469 Rock Max four-cutter, with a raised central primary blade and two smaller side inserts
B-39469 Rock Max. The primary blade has a more pronounced central peak and shaped wings. The side inserts remain visible behind it.

Select any image to open it at full size.

B-15045 Rock Blaster from two more angles

B-15045 Makita mining catalogue illustration with an enlarged view of the head
B-15045 catalogue view. The enlarged circle shows the head just ahead of the first turn of the flute.
B-15045 Rock Blaster oblique view of the head and steel body
B-15045 at an angle. You can see how the steel supports the carbide behind the cutting edge and where the flute starts.

B-39469 Rock Max from the side and in full view

Side view of B-39469 head and first section of the spiral flutes
B-39469 from the side. Compare the leading profile of the primary blade and how the clearance behind the head opens into the spiral.
B-39469 Rock Max full-length photo showing the head, spiral and SDS-Max shank
B-39469 in full view. The spiral runs from behind the head towards the SDS-Max shank.
B-39469 reference drawing showing the spiral and the SDS-Max shank
B-39469 reference drawing. It shows the spiral and shank layout. Use the dimension table above for the actual lengths.

For a comparison, measure penetration per hole and monitor chipping at the primary blade and loss of gauge at the side cutters. The images show the external profile. The approved drawing and sample determine carbide dimensions, joining and drilling performance.

Choosing a Zhonghuan mining bit in the same size

For hard, abrasive rock or when evacuation limits deep-hole drilling, start the sample trial with ZHMAX-7. Its full-width carbide blade and two staggered side inserts form four active cutting edges. For medium-hard or mixed rock where hole roundness is the priority, compare the ZHMAX-168 three-plate, six-edge head at the same target dimensions. Test on the same rock and hammer at the same depth. Record seconds per hole, usable metres and final hole diameter.

Zhonghuan ZHMAX-7 carbide head with a full-width blade and two staggered side inserts
Zhonghuan ZHMAX-7 sample head. The full-width blade supplies two edges and each side insert supplies one.

See our ZHMAX-7 granite drilling video for the Ø28 × 570 mm test setup. For a Ø32 × 800 × 920 mm order, we approve a sample at the target size.

Frequently asked questions

What is the working length of Makita B-15045?

800 mm. The cutting diameter is 32 mm and the overall length is 920 mm.

Which 32 mm Rock Blaster model is shorter?

Makita B-14613 is 570 mm overall with 450 mm working length. B-15045 is 920 mm overall with 800 mm working length.

How can a distributor source an OEM bit in the B-15045 size?

Send the reference, quantity and country. We quote our own head designs for Ø32 × 800 × 920 mm and confirm the configuration by drawing and paid sample.

Where can I check the price and stock of the original B-15045?

Ask a Makita dealer in your market for current unit price and availability. Our quote covers Zhonghuan mining bits for wholesale and private label.

Is B-39469 a newer version of the B-15045?

B-39469 is the later Rock Max / Mining 2 design. Both models remain listed in Makita Malaysia’s accessory catalogue and share a 32 mm diameter, 800 mm working length and 920 mm overall length. The primary blade profile and the side inserts distinguish the heads.

Makita catalogue sources

24-hour response guaranteed

Get a Quote for Your Spec

Tell us what you need. Our team responds within 24 hours with pricing and lead time.

sales@zhonghuantools.com

Products and Engineering Support

Match the tool to your application, compare product options, or ask our engineers to confirm a specification.

Run the Drilling & Cutting Selector

Choose the drilling or sawing task, machine and job condition, then carry the matched program into the RFQ.

Open System Selector

Compare SDS-Max Drill Bits

Review cutting-head constructions and sizes for your SDS-Max range.

View SDS-Max Range

Request Engineering Quote

Submit key details and receive a more qualified response on pricing and lead time.

Contact Engineering
#Makita #B-15045 #Rock Blaster #ZENTRO #SDS-Max #ZHMAX-7 #B-39469 #Rock Max