Skip to main content

Hilti SPX-T 35 mm Wet Core Bit for the DD 30-W — C+ Fit and Use

Author Zhonghuan Engineering Team
Published 2026-11-22
Reading Time 5 min read

Need Help Choosing a Tool?

Share your application, required dimensions and quantity. Our engineering team can recommend a product and confirm pricing and lead time.

Request Engineering Quote
Hilti DD 30-W hand-held wet coring in a concrete wall, with water management equipment to the left.
Hilti DD 30-W hand-held wet coring in a concrete wall, with water management equipment to the left.

Key Specification / Takeaways

  • 01. #2207571 is a 1⅜″ × 12″ SPX-T wet core bit with a C+ quick-release end. Those dimensions are about Ø35 mm × 305 mm.
  • 02. The DD 30-W is designed for Ø8–35 mm wet coring. The C+ end fits the machine’s C+ chuck and the diamond crown cuts the hole.
  • 03. C+ and BI use different chucks. A 1¼″-7 UNC bit instead screws onto a matching threaded spindle. Confirm the fitted chuck when ordering.

Read the box label and item number

A narrow conduit pass-through or a specified diamond-cored anchor hole can call for a wet core bit even at a small diameter. Hilti’s SPX-T #2207571 is a 1⅜″ × 12″ wet core bit with a C+ quick-release end for the DD 30-W. The box label in the photos matches Hilti’s North American item list.

The two dimensions convert to about Ø35 mm and 305 mm working length. Hilti also lists the same bore diameter with a 24″ working length as #2207572. Give the supplier the diameter, working length and item number. Determine the required hole depth from the job.

Full view of the SPX-T #2207571 sample beside its box.
Full view of the SPX-T #2207571 sample beside its box.
Box label showing C+, 1⅜″ × 12″, SPX-T and item #2207571.
Box label showing C+, 1⅜″ × 12″, SPX-T and item #2207571.

Hilti North American item list · Photos of the #2207571 sample

The diamond crown at the front and C+ at the back

The sample has a slotted annular diamond crown at the front and a red barrel behind it. The crown cuts around the perimeter and leaves a core in the centre. Water cools the cutting end and helps carry away slurry.

At the rear, the silver C+ end fits the chuck. Hilti’s inch product page labels the connection option C (Hilti). The description and the sample box use C+, and the DD 30-W manual lists DD-C core bits. The fitted chuck and item number are the details to confirm when replacing a bit.

SPX-T cutting end with slots in the diamond crown and helical grooves visible near the end of the red barrel.
SPX-T cutting end with slots in the diamond crown and helical grooves visible near the end of the red barrel.
Silver C+ quick-release end and the 1⅜″ diameter marking on the barrel.
Silver C+ quick-release end and the 1⅜″ diameter marking on the barrel.

Hilti SPX-T product data · DD 30-W manual

How C+, BI and 1¼″-7 UNC connect

Rear connectionHow it attachesExample
C+The short end engages a C+ chuck.SPX-T #2207571 on a DD 30-W
BIThe keyed end engages a matching BI chuck.SPX-L Handheld #3640430 with BI
1¼″-7 UNCThe female thread screws onto a matching male spindle.1¼″-7 threaded wet core bit, also designated BS in Hilti’s range

Connection and hole diameter are separate entries on the order. Hilti lists Core Bit BI 1¾″ × 12″ #3640430 as an SPX-L Handheld bit. BI identifies the rear end and 1¾″ is the nominal hole diameter of about 44.5 mm. On a threaded bit, 1¼″-7 UNC gives the nominal thread diameter and seven threads per inch.

Hilti chuck chart · Hilti BI+ to BS 1¼″-7 adapter · Hilti SPX-L order list

Hilti diamond drilling handbook · Hilti #282991 clamping spindle

When to use a DD 30-W for small concrete holes

Hilti specifies the DD 30-W for Ø8–35 mm wet coring. Typical jobs include small conduit and pipe penetrations and projects that specify diamond-cored anchor holes. The bit cuts with rotation. Hilti identifies work near edges and low-noise renovation work as applications for this non-impact system.

Handheld operation makes it easy to move between hole positions. The DD-ST 30 stand helps guide the drilling axis on repeat holes. Plan water supply and slurry collection for the wet setup. The application photo shows the water collector at the wall.

Hilti DD 30-W corded core drill for small wet holes.
Hilti DD 30-W corded core drill for small wet holes.
Hilti application photo showing the water collector against the wall.
Hilti application photo showing the water collector against the wall.

For adhesive anchors, use the drilling method, depth and hole preparation specified for the anchor system. Hilti’s HIT-RE 500 V3 technical guide, for example, documents a diamond-cored installation condition with the TE-YRT roughening tool.

Hilti DD 30-W guide and application photos · Hilti handheld wet coring demonstration · Hilti anchor application guide

Specifying a small wet core bit with Zhonghuan

We supply OEM and private-label diamond core bits for distributors, importers and tool brands. Send the machine model or a photo of the fitted chuck, the required hole diameter and depth, the concrete application and the quantity by size. An existing bit, drawing or box label helps us check the fit.

We review the connection and water supply before selecting working length, barrel and cutting crown. For a C+ request, we confirm the actual chuck and sample fit first. Record hole starting, time per hole and crown wear during sample evaluation. After approval, agree the batch specification, marking and packaging.

Request an OEM wet core bit quote

Zhonghuan diamond core bits

24-hour response guaranteed

Get a Quote for Your Spec

Tell us what you need. Our team responds within 24 hours with pricing and lead time.

sales@zhonghuantools.com

Products and Engineering Support

Match the tool to your application, compare product options, or ask our engineers to confirm a specification.

Validate Cutting Parameters

Use the calculator to confirm speed and application match before product selection.

Open RPM Calculator

Review Product Options

Compare relevant product lines and narrow down suitable series quickly.

View Product Catalog

Request Engineering Quote

Submit key details and receive a more qualified response on pricing and lead time.

Contact Engineering
#Hilti SPX-T #Hilti DD 30-W #Diamond Core Bits