Two SPX-L bits for a 4-inch hole
For a 4-inch sleeve hole in concrete, Hilti lists a handheld wet bit and a rig kit in the same diameter, length and connection. SPX-L Handheld #3640435 is listed at 4″ × 12″ with BI quick release. Its diamond segments are laser welded to the barrel. The rig product pictured below has a separate silver cutting crown. These are Hilti series photos that show the construction. The ordering record identifies the exact 4-inch item.



Hilti Handheld technical data · Handheld item #3640435 · Hilti rig crown and core-removal gallery
What the 8 mm segment height tells you
8 mm is the nominal segment height in Hilti’s technical data. It runs along the barrel axis, from the base of the segment to its cutting face. For a drawing or sample request, also specify segment width, segment count and barrel dimensions. Segment width and the diamond segments’ projection past the inside and outside of the tube help determine the kerf and barrel clearance.

Hilti describes a thin-wall barrel and thin segments that require less contact pressure when feeding by hand. It also lists an optional hole-starting aid and Equidist diamond placement above 1⅜″ for this family, which covers 4″. For an OEM sample, we can measure the existing bit or confirm the relevant dimensions from your drawing.
DD 110-W, DD 150-U and BI quick-release fit
The SPX-L Handheld product page lists the corded DD 110-W and DD 150-U. The DD 110-W supports handheld wet coring in concrete. The DD 150-U supports handheld and stand-mounted work. Use the manual for the specific tool generation to check the permitted diameter in the chosen mode, and match the #3640435 BI connection to the chuck fitted to your machine.




DD 110-W product data · DD 150-U operating instructions · Hilti BI (M41) connection end
How to choose between handheld and rig-mounted wet coring
Hilti’s North American ordering list gives both #3640435 and #3872479 a 4″ × 12″ size and BI connection. The second item is an X-CM rig kit with one replaceable crown, a barrel and a BI connector. The photos show the key physical difference at the front of the bit.
| Specification | SPX-L Handheld | SPX-L rig kit |
|---|---|---|
| North American item | #3640435 | #3872479 |
| Diameter × working length | 4″ × 12″ (Ø102 × 305 mm) | 4″ × 12″ (Ø102 × 305 mm) |
| Cutting end | Fixed 8 mm laser welded segments | Replaceable X-CM crown |
| Operating mode | Handheld wet coring in concrete | Rig-mounted wet coring in concrete |
| Connection end | BI | BI |
| Listed machines for the family | DD 110-W, DD 150-U | DD 120, DD 150-U, DD 160 |


In handheld work, the operator maintains alignment and feeds the bit. On the stand, the carriage follows a fixed guide rail, helping repeat holes on the same axis. When concrete thickness approaches 300 mm, check the effective drilling depth and the clearance for the assembled tool. Use representative concrete to compare time per hole and segment wear.

Rig kit #3872479 · Hilti rig crown and core-removal gallery
Specifying a Zhonghuan OEM wet core bit
We supply OEM and private-label diamond core bits for distributors, importers and tool brands. Send us the rig model or a chuck photo, your required diameter and effective working length, the concrete application and the quantity by size. A current bit, item label or drawing helps us match the connection and propose a barrel and crown for sampling.
- Handheld sample. Start with Ø102 mm and about 305 mm working length. Confirm the actual chuck, barrel wall and segment width.
- Stand-mounted sample. Confirm depth and the fitted holder. Specify BI or the matching 1¼-7 UNC connection where applicable, then agree on the concrete and the conditions for the trial.
- Approve the sample. Record starting behaviour, time per hole and segment wear. Use those results to agree the batch specification, marking, packaging and volume.